Posted on

Handmade Sink Installations Notes

Today, stainless steel Handmade Sink can be found every kitchen. What needs to be paid attention to the selection and installation of stainless steel handmade sink

1.first consider the installation location of the sink, need to meet the operating convenience.

The square type kitchen and sink are generally installed in the middle to facilitate the operation of the refrigerator and the cooker. Also avoid the problem that water and fire cannot be too close in feng shui.

The L-shaped kitchen also follows the principle of the sink in the middle of the operating area, but note that there is a certain position between the sink and the refrigerator to facilitate the operation of taking things from the refrigerator.

Rectangular kitchen is also the most common small-sized kitchen. The general console is only one side. The sink is installed in the middle of the cooker and the refrigerator. Generally, there is a larger space reserved for the refrigerator.

2.consider the size of the Stainless Steel Sink Colander .

If the kitchen space can be affluent, the installation of a two-slot sink is certainly smoother, but if the space is smart to install a single-slot sink, we should pay more attention to the functionality of the sink. At present, Stainless Steel Small Radius Sink is also specially developed for small size units.

3. consider the sink faucet hole number, and right-handed use habits.

Generally, there are 1-3 openings for sinks, which are cold taps, hot water taps, and water purifier taps. If you are used to using hot and cold water taps, at least 1 hole is enough, if you are cold If the hot water is separated from the faucet and a water purifier is required, a maximum of 3 faucet openings are required.

Finally, please learn more information before buying Stainless Steel Countertop Sink , welcome to our site for further information.

Posted on

Use of the Stellite Alloy 12 Band Saw Blade

The tip of the Stellite Alloy 12 band saw blade has the advantages of high hardness, excellent wear resistance, high fatigue resistance of the saw band, high-speed sawing of various non-ferrous metals and super-hard and brittle metal materials. Particularly suitable for sawing: cast iron, ductile iron, superalloys, memory alloys, titanium alloys and wear-resistant tool steels.

In addition to the basic operating procedures of the bi-metal band saw blade, the use of the stellite alloy band saw blade requires attention to the choice of line speed. When the line speed is too fast, excessive heat is generated, which can make the saw teeth become dull or toothed.

The band saw blade is a general term for saw blades, including: metal band saw blades, tungsten steel band saw blades, stellite alloy band saw blades, woodworking band saw blades, mahogany band saw blades, and the like.

Woodworking band saw blades are just one of them, suitable for cutting different woods. Carbide band saw blades with alloy heads or ordinary woodworking band saw blades are used depending on the hardness of the wood.

The characteristics of the stellite alloy band saw blade are mainly the following:

1. New excellent Stellite Alloy 3 tip, wear and vibration resistance

2. Firm solder contact surface

3. Three hard alloy grinding surfaces

4. High quality toughness with back

5. High wear resistance

6. Improve tip fastness

7. The cutting surface is smooth and smooth

8. Fast cutting

9. long lasting

After using the stellite alloy saw blade grinding machine saw blade for a period of time, the serration will become dull. If it continues to be used, one cutting efficiency will become lower and the product quality will be worse. Second, the serration will be easily damaged, and the severely cracked belt will be damaged. Saw blade. Therefore, it is necessary to repair the saw teeth in time to ensure the cutting efficiency and the quality of the products.